No Products in the Cart
Save upto 30% on Airific 2.0Get the offer NOW!
AirQuality Technology offers wide range of air purification solution with MESP® technology that includes Portable Air Sterilizing Purifier for residential and small commercial spaces, and Air Conditioning Sterilizing Purifier (In-Duct Air Purifier) for large commercial spaces. MESP® Air Sterilizing Purifier, a new generation of eletronic air purifier (or electronic air cleaner/EAC), are proven as a superior solution for IAQ that can both efficiently sterilize and purify the air with washable filter. Moreover, since the air in the system passes more easily (low air resistence), energy consumption can be greatly reduced.
MESP® can efficiently kill 99.99% of viruses and 99.96% of bacteria with its strong electric field.
Differing from traditional media filters, the pressure drop is low with MESP filters because there is no need to force air through a matrix of small air passages. The physics makes its higher efficiency.
The unique nano PP made filter is permanently washable and designed for more than 10 years lifespan. The total running cost should be much lower than traditional media-filter products.
MESP filter works with about 1 µA of current at 6-10 kV, which can prevent from electric shock. Almost no ozone and any harmful byproducts. It releases negative ions beneficial to health while working.
No worry about extreme change of humidity (up to 100%) and temperature (-15℃ to 50℃), our products will work properly all the time. MESP also has very good flame retardant properties.
Low air pressure drop makes our products working with low power supply. Compared with the use of HEPA filters, the energy consumption of fans using MESP purifiers is 50% to 60%.
High-efficiency particulate air (HEPA), also known as high-efficiency particulate absorbing and high-efficiency particulate arrestance. Filters meeting the HEPA standard must satisfy certain levels of efficiency. Common standards require that a HEPA air filter must remove—from the air that passes through—at least 99.95% (European Standard) or 99.97% (ASME, U.S. DOE) of particles whose diameter is equal to 0.3 μm; with the purification efficiency increasing for particle diameters both less than and greater than 0.3 μm.
MESP® stands for Micro-electrostatic Precipitator. It is highly efficient at removing airborne particles like PM2.5, fungus, dust, pollen, soot, smoke and powerfully deactivates viruses and bacteria. In the MESP system, airborne particles in propelled air flow are electrically charged before passing into honeycomb shaped filter. The filter is formed by layers or rows of tubes and each row contains thin electrode sheets with insulation coating that generate intense electrical fields within the tubes. Charged particles - pollutants, bacteria, germs, viruses - are pulled to the walls of the tubes - and firmly stick.
1. Viruses always adhere to airborne particles and droplets. The HEPA filter can capture some viruses by attracting particulate matter. However, we have not seen experimental data to prove the efficiency of HEPA to capture viruses.
2. The viruses captured by HEPA filter is active, so there are two risks as following:
-It perhaps blown out by the airstream to re-contaminate the indoor environment,
especially if the filter is overloaded.
-There is the risk of virus infection for the operator when replacing the filter.
MESP system can capture fine particles as small as 0.01μm. It‘s highly effective at capturing and trapping microbes such as germs, bacteria, viruses, mold, etc. Meanwhile MESP system will definitely kill those harmful microorganisms with high voltage (over 10KV) strong electrostatic field. Safe and controllable!
An independent U.S. research laboratory conducted the research study by introducing the SARS-CoV-2 pathogen to an AQT air purifier built with MESP technology. The test result showed a significant reduction of pathogen at the downstream collection point and achieved a 99.99% SARS-CoV-2 sterilization rate. SARS-CoV-2 is the virus that causes COVID-19. A copy of the test report is available here.
| HEPA | MESP | |
| Purification Efficiency | Excellent | Excellent + |
| 0.3 μm particle capture: 99.97% Smallest particle capture: no data |
0.3 μm particle capture: up to 99.99% Smallest particle capture: 0.01 μm |
|
| Air Sterilization | None | Excellent + |
| Just capture but not kill | Up to 99.99% | |
| Pressure Drop (resistance) |
Poor | >Excellent |
| 0.6 - 1.2” wg (150-350 pascals) | >0.04-0.2” wg (10-50 pascals) | |
| Energy Cost | Poor | Excellent |
| Significantly more energy due to high pressure drop | Air easily passes through the filters | |
| Maintenance Cost | Poor | Excellent |
| Final and/or pre-filters require frequent replacement/disposal. | Occasional cleaning takes only minutes. | |
| Service Life | Poor | Excellent |
| Loads quickly unless configured with substantial pre-purification. | Properly maintained MESP filter is permanent: Never needs replacing. | |
| Noise | Poor | Excellent |
| High pressure drop = high noise | Low pressure drop = quiet air flow | |
| Adapt to high humidity environment | Poor | Excellent |
| Noramlly not exceed 70% | Up to 95% | |
| Fire prevention | Poor | Good |
| Inflammable | Non-flammable |
FOLLOW US
