Airific Marvel - Peter Tingle & Zap Face Cover – Nirvana Being
Grab official Spiderman Merchandise NOW!
Peter Tingle & Zap
Peter Tingle & Zap
Peter Tingle & Zap
Peter Tingle & Zap
Peter Tingle & Zap
Peter Tingle & Zap
Peter Tingle & Zap

Peter Tingle & Zap

Rs. 495.00
  • Nanotech filter in the middle layer
  • Minimum use of 500 hours/10 washes
  • Tested by Nelson Labs, USA
  • Highly breathable
  • Adjustable nose wire
  • Adjustable earloops
  • Free Shipping
  • Easy Returns
  • Secure payment
  • SKU: NI2126
  • Availability: in stock Many in stock Out of stock You can purchase this product but it's out of stock
DESCRIPTION

Three-Layer Mask
3-Layer Technology
With an electrospun nanotech fiber filter in the middle layer

  1. Outer layer made using cotton, linen, flax, and hemp
  2. Nanotechnology media to block even the smallest airborne particles with >95% efficacy
  3. Inner Layer made using natural fibers

Timeless and tasteful designs
Available in ten different designs to wear from dawn to dusk.
 
Nanotechnology Media
Our advanced media has been tested to block respiratory droplets and pollutants such as bacteria, pollen, and other allergens as small as 0.1 microns in size.
 
Breathable and comfortable
Tested for extremely low breathing resistance, driving high comfort.
 
Tested by international bodies
Affirms maximum protection and airflow for easy breathing.
 
Sustainable
Reusable and washable masks made using cotton, flax, hemp, and linen in the inner and outer layers.

 

Name and address of manufacturer/packer: Nirvana India Pvt. Ltd., B1 Extension,  A-41, Mohan Cooperative Estate, Mathura Road, New Delhi - 110044
Country of origin: India

As Seen On

FAQs

What Is Nirvana Facewear Made Of?
The Nirvana Facewear consists of three layers. In the middle layer, we use an electro spun nanofiber media to provide a higher level of safety and protection and filter down to particle sizes up to 0.1 micron (including respiratory droplets and pollutants such as bacteria, pollen and other allergens. Each face covering’s middle-layer media is estimated to contain over 25km of nanofiber in an area less than 1mm thick. The inner layer and outer layers are made of cotton.
What Are The Safety Procedures For Handling A Face Covering?
You have to wash your hands with soap/sanitizer before and after you touch your face covering. Only touch the face covering from the ear loops to wear and remove it. Avoid touching the outer or inner face of the face covering as it may be contaminated. In case you do come in contact with these surfaces, please wash your hands with soap, or use hand sanitizer immediately.
How To Disinfect The Nirvana Facewear?
  • Using a UV sterilizer
  • Sunning the Facewear in the day or airing it in a fanned room so that all the moisture on the Facewear is dry will kill any contaminant.
  • Keep in mind that washing a Facewear does not sterilize it. Also, please do not spray sanitizer or disinfectant on the Facewear as it contains rubbing alcohol and may lead to discolouration of the Facewear.
    Do We Need To Disinfect Every Time Even If We Use The Nirvana Facewear For An Hour Or Less?
    If you have been in a crowded space, then you must disinfect after every use, irrespective of the length of time of usage
    How Do We Identify That The Nirvana Facewear Needs To Be Discarded?
    If the fit is compromised in any way, so that all the air on the inhale is not being forced through the face of the Facewear, then it is time to get a replacement. In addition, do replace your mask if the breathing resistance becomes too high.
    What Is The Process For Disposal?
    Disinfect following the above process and dispose.
    What Is The Life Of Nirvana Facewear?
    Nirvana Facewear offers up to 300-500 hours of usage depending on the care and maintenance. It is good for up to 10 washes.
    Can I Use A Sanitizer To Disinfect My Facewear?
    Avoid using a sanitizer to disinfect your mask as it may lead to colour bleeding.
    The Mask Is So Lightweight, Does It Actually Have A Filter In The Middle Layer?
    We use nanotech fibres in the middle layer, while the inner and outer layers are made with cotton. One of our metrics is to reduce the weight of the Facewear to drive comfort with each version - the goal is to deliver a featherweight Facewear, so the user doesn’t even realise that they have a Facewear on..
    Is It A 3-Layer Facewear?
    Yes, inner and outer layers are made using cotton and the middle is made from an electrospun nanotech media. It is one of the best air pollution masks available in the market.
    How do I wash my Airific Facewear?
    Wash the Facewear by rinsing the outer and inner layer with water and mild liquid soap. Rinse it again, do not squeeze the Facewear. Hang dry fully before using it again.

    @nirvana_being

    FOLLOW US

    BACK TO TOP
    ×

    Call for Price

    I agree to my email being stored and used to receive the newsletter.